The Viking 35 Ton "Load Handler" is one of the most versatile trailers in the equipment hauling market. This trailer is commonly used to transport a variety of heavy machinery including a variety of track and rubber tired equipment. This trailer has proven itself in the construction, forestry, and petroleum industry as a first choice for transporting equipment and materials from job to job. For information on this trailer Click on the Dealer locator to contact a dealer near you.

Dimensions:

• 46' feet long, 102" inches wide
• 9'-3" upper deck load area
• 28'-11" lower deck load area
• 5' dovetail
• 30 degree drop
• 41" rear deck height

Weight:

16,000 lbs. Light +/-3%

Features:

Mainframe 16" Fabricated beam with 1/2" x 6" top flange, 3/4" x 6" bottom flange; 1/4" web; All flange material is (Grade 130) All web material is (Grade 70)

Crossmembers 8" x 6.5# Jr. I-Beam on 20" centers

Kingpin 2" SAE King Pin, 3/8" king pin plate with 20" setting that allows an 84" swing clearance.

Siderails 12" x 20.7# Structural channel; 8" x 8.5# Structural channel on the neck

Tires 255/70R x 22.5 radials

Wheels 10 hole steel disc; hub piloted wheels

Axles & Brakes (2) 25,000# 5" round axles with 16 1/2 x 7 service chambers, outboard drums, 2S/1M on one axle.

Suspension Hutch H9700T three point spring suspension with 365-00 3-leaf heavy duty springs.

Lights Sealed wiring harness with rubber mounted incandescent lights. (Optional L.E.D. lights)

Landinglegs Holland Mark V; 2 speed with sand shoes; 62,500 lb. lift capacity with handle located on the road side.

Metal Covering 1/4" Metal tread plate with 3/4" traction bars is standard on the dovetail and over the tandem areas. 1/4" Smooth plate with 3/4" traction bars on the approach to the upper deck.

Dovetail 5 ft. Covered with 1/4" tread plate with 3/4" traction bars. (Optional Open Floor dovetail with inverted angle iron for self cleaning)

Loading Ramps (2) 6' stand up ramps, activated with double compression springs on each ramp that assist in raising and lowering.

Floor 2" nominal oak is standard. (Optional Flooring includes: Apitong, Shiplap Pine, Bamboo, Transdeck, and Steel Sheeting)

D-Rings 18 total (14)-1" on rear deck/(4)-1" on front deck

Finish Shotblasted and painted using Carboline brand high solids polyurethane paint.(Standard colors are Black, Red, and Cat Yellow)

 

Options:

• Watson-Chalin Single pt. suspension
• HT250US or Intraax Air Ride Suspension
• Flooring: apitong, hiplap pine, "Transdeck", and steel plating
• Winches
• Folding outriggers
• Width increased to 9'
• Longer and shorter lengths
• Between the beam toolbox
• 36" Deck Height available with 17.5 tires
• 4'-6" Lay flat ramps
• 4'-6" Deck level ramps
• Hydraulic assisted ramps
• Third ramp located in the center for 3-wheel machines 
• Epoxy primer and custom colors