The 35 Ton Hydraulic Beavertail is designed for loading and unloading a variety of heavy equipment. The full width hydraulic apron raised and unfolds and provides a full width loading ramp surface allowing all types of wheel and track machines to be loaded and unloaded safely. Available with a hydraulic winch to assist in loading damaged and non working equipment. Popular in the equipment rental business the Viking 35 Ton is a must have to get the job done.

Dimensions:

• 49 feet long
• 102 inches wide
• 36" rear deck height (light)
• 9'3" flat upper deck
• 27' flat lower deck
• 20" kingpin setting; 3/8" k.p. plate

 

Mainframe 16" Fabricated I-beam

Crossmembers 8" x 6.5# Jr. I-Beam on 20" centers

Siderails   12" x 20.7# structural channel; 8" x 8.5# on neck

Tires  235/75R x 17.5 radial tires (Bridgestone R184LP or equal)

Wheels 6.75 x 17.5 steel disc, 10 hole, stud piloted

Axles & Brakes  (2) 25,000#, 5" round; 12 1/4 x 7 1/2; spring type chambers; outboard drums; WABCO ABS (2S/1M) on one axle

Suspension   Hutch H9700T three point with 3 leaf heavy duty springs

Lights  Rubber mounted, sealed wiring harness

Landinglegs   2 speed with sand shoes; 62,500 lb. lift/200,000 lb. static load capacity

Dovetail   9 ft. with 3 ft. fold under apron (12 ft. OAL) with approx. 14.5 degree approach angle; covered with 2" nominal oak

Floor   2" nominal oak

D-Rings 18 total [(14)-1" on rear deck, (4)-1" on upper deck]

Finish  Shotblasted and painted using Polyurethane(DTM)Direct To Metal paint (Standard colors are Black, Red, and Cat Yellow)(Optional: Epoxy or Zinc-Rich Primer available.

 

Options:

• Ramsey 15,000 lb. hydraulic winch with 5/8" x 100' cable
• Hand valve
• (2) two remote ports and 12 ft. remote cable for winch
• Hendrickson-Turner air ride suspension with dump valve Watson-Chalin Single pt. suspension
• Hendrickson-Turner HT250US Air Ride Suspension
• Hydraulic assisted ramps
• Flooring
• Winches
• Fold out Outriggers
• Width increase to 9'
• Longer and Shorter lengths
• Between the beam Toolbox
• 36" Deck Height available with 17.5 tires
• Winches
• 4'-6" Lay flat ramps
• 4'-6" Deck level ramps